Anchoring products

Anchors are used for fastening in concrete, plasterboard, and other materials.

Stud anchors (w/ nuts and washers)

Stud anchors (also referred to as wedge anchors) are one piece expansion bolts with universal style collars for heavy duty fastening in stone or solid concrete. Stud anchors come with nuts and washers.   Zinc plated steel Steel is zinc plated for moderate protection against rust. Stainless steel 18-8 Stainless steel 18-8 is an alloy of steel with high corrosion resistance. Stainless has become the material of choice for exterior and most marine applications. Hot dipped galvanized Hot dipped galvanized fasteners are much more corrosion resistant than zinc plated fasteners. Due to the thickness of the galvanized coating, galvanized bolts will only work with galvanized nuts. For exterior and coastal area use. (ASTM A153)

Sleeve anchors hex head
A heavy duty anchor for use in brick, stone, concrete or block. Does not require a solid base material for installation.   Zinc plated steel Steel is zinc plated for moderate protection against rust.

Sleeve anchors slotted flat head
A heavy duty anchor for use in brick, stone, concrete or block. Does not require a solid base material for installation.   Zinc plated steel Steel is zinc plated for moderate protection against rust.

Lag shields
A medium duty zinc alloy anchor for use in concrete, brick or a mortar joint. Used with a lag bolt.   Die cast zinc alloy An alloy consisting of approximately 95% zinc alloyed with aluminum, copper and other elements for good corrosion resistance.

Machine screw anchors
A two-piece machine thread anchor for use in stone, brick, concrete. Ideal for shallow holes. Must be installed threaded end towards the hole and fastened in place with a setting tool (sold separately).   Zinc and lead A combination of materials used in machine screw anchors featuring a zinc alloy cone with a lead ring.

Drop-in anchors
A heavy duty machine thread anchor for concrete or stone. The anchor uses an internal cone to expand in the hole and requires a setting tool (sold separately). Ideal for overhead applications. Install crimped end towards hole.   Zinc plated steel Steel is zinc plated for moderate protection against rust.

Double expansion sleeve
A zinc alloy anchor with two-way expansion that ensures contact along the length of the hole. Use in concrete, block, stone and brick. The anchor is set by tightening the machine screw or bolt. Install anchor threaded end towards the hole.   Die cast zinc alloy An alloy consisting of approximately 95% zinc alloyed with aluminum, copper and other elements for good corrosion resistance.

Concrete screws phillips flat head
Used in concrete, brick or block. A quick and easy way to fasten in light to medium duty applications. A pilot hole is required and a hammer drill is recommended for ease of installation. 1 bit supplied with each box (extra bits sold separately).   Blue coated steel Steel is hardened and blue coated for moderate corrosion resistance.

Concrete screws hex head
Used in concrete, brick or block. A quick and easy way to fasten in light to medium duty applications. A pilot hole is required and a hammer drill is recommended for ease of installation. 1 bit supplied with each box (extra bits sold separately).   Blue coated steel Steel is hardened and blue coated for moderate corrosion resistance.

Large diameter concrete screws hex head
Used in concrete. A quick and easy way to fasten in light to medium duty applications. A pilot hole is required and a hammer drill is recommended for ease of installation.   Galvanized Steel is galvanized for protection against rust.

Spring toggle wings
A spring loaded anchor that folds for installation through a pre-drilled hole. Use with machine screws. Once through the hole, the wing re-opens. Place screw through object to be mounted first. The wing will fall if screw is removed.   Zinc plated steel Steel is zinc plated for moderate protection against rust.

Plastic toggle anchors
This anchor is designed to open behind drywall or hollow doors for a secure hold. Drill 5/16 for all sizes. It can also be used in solid materials.   Plastic A hard polyethylene plastic material.

Conical anchors
This light duty plastic anchor is used with sheet metal screws in block, brick, concrete and drywall. Each size can use a range of 2 screw diameters.   Plastic A hard polyethylene plastic material.

Ribbed anchors
This light duty plastic anchor uses sheet metal screws and is best in drywall and plaster. The ribbed design helps prevent spinning and the anchor is designed to expand and hold to a greater degree than a standard conical anchor. Each size can use a range of 2 screw diameters.   Plastic A hard polyethylene plastic material.

Woodscrew anchors
This anchor is made of lead and can be used with woodscrews or sheet metal screws. Each size can use a range of 2 screw diameters.   Lead A soft metal that forms easily and is corrosion resistant.

Hollow wall anchors
Often referred to as a 'Molly Bolt', hollow wall anchors are used for light duty anchoring in drywall or other hollow walls. The screw can be removed and re-inserted but the anchor itself can not be removed.   Zinc plated steel Steel is zinc plated for moderate protection against rust.

Hollow wall drive anchors
These hollow wall anchors have a metal tip that allows them to be installed in drywall with a hammer rather than drilling a hole.   Zinc plated steel Steel is zinc plated for moderate protection against rust.

Nail drive anchors
These anchors when driven in expand inside the hole for a secure grip. Drill hole the same size as the anchor. Non-removable.   Nylon steel pin A nylon anchor utilizing a steel drive pin Die cast zinc alloy steel pin An alloy consisting of approximately 95% zinc alloyed with aluminum, copper and other elements for good corrosion resistance. Drive pin is zinc plated steel.

Anchor bolts (w/ nuts and washers)
Used for anchoring in new concrete.   Hot dipped galvanized Hot dipped galvanized fasteners are much more corrosion resistant than zinc plated fasteners. Due to the thickness of the galvanized coating, galvanized bolts will only work with galvanized nuts. For exterior and coastal area use. (ASTM A153)